Seam facing camera. Still figuring out how to finish inside of ring.
2 thoughts on “before/after”
I would use a sanding drum and a bristle brush (white nylon 😉 ) T
just looking through peoples projects. that looks great regarding learning to use the torch and soldering. I soldered for 25 years and although I find this easy I have had so many tech’s wash out of the trade because they could not solder. Well I would try to use a 360 to 400 grit then a 600 to 800 and finally a 1200-3000 on the inside and just use finger pressure. The sand paper will do most of the work for you than a quick buff with a felt wheel with green tripoli and then follow up with a white or black polish. It will look great.
I would use a sanding drum and a bristle brush (white nylon 😉 ) T
just looking through peoples projects. that looks great regarding learning to use the torch and soldering. I soldered for 25 years and although I find this easy I have had so many tech’s wash out of the trade because they could not solder. Well I would try to use a 360 to 400 grit then a 600 to 800 and finally a 1200-3000 on the inside and just use finger pressure. The sand paper will do most of the work for you than a quick buff with a felt wheel with green tripoli and then follow up with a white or black polish. It will look great.