Home » Level of Difficulty » Beginner » Chain Making – Fox Tail Chain Part 3
Chain Making – Fox Tail Chain Part 3
This type of chain, the Double Fox Tail, looks an intricate chain and robust chain and one that will take a lot of wear. The construction of the chain is straight forward but it does take some careful planning and experimentation.
There is a close relationship between the thickness of the wire to the dimensions of the mandrel on which you wind the wire. Have the wire too thick or the mandrel too small and the links won't be able to be passed through each other or the chain will be too rigid. Make the wire too thin or the mandrel too thin and long and the chain will look open and weak.
Use the dimensions of the wire and mandrel Andrew uses as a starting block. You may want to make the wire slightly thinner so the chain is very flexible or you may not have a mandrel the same size. Start off with copper wire and experiment.


