Home » All Films » Repairs » Repairs - Intermediate » Intermediate Repairs – Retipping using Solder
Intermediate Repairs – Retipping using Solder
Claw set rings, over the years, receive a lot of wear. The thinner the claw the less there is to wear away. Providing that some of the claw is still covering the stone it is possible to build up the top of the claw with solder that corresponds to the carat and colour of the claw itself.In this 15 minute film, Andrew shows you how to handle your torch so you can direct the heat to allow the solder to flow only on the tip of the claw. This type of repair is only suitable on small claws though.


