Home » All Films » Techniques » Lost Wax Casting – Burning Out The Wax
Lost Wax Casting – Burning Out The Wax
So with the investment plaster set, we now need to remove the wax so that we are left with a cavity of the exact shape as the wax. We need to place the flask in a kiln and melt the wax out. The flask then has to bake in the kiln at a very high temperature and then return to a lower temperature ready to cast. This next process took 11 hours to complete but recently Andrew has completed this step in as little as 5 hours. A kiln with a temperature controller is a big advantage in this process.
If you want to be cast it yourself then you can, you just need to buy the right equipment. This can be purchased via auction sites or companies that are going out of business or just someone who just wants to get rid of it. Andrew carries on with the journey in this film and shows you how to attach the master wax pattern to the base. Again, there are several ways to do this but only one way is right. Andrew takes you through every step in great detail.
This is a series that ends up with using the Lost Wax Casting process and the placing the finished ring on display in Andrews shop.
Kiln kindly supplied by Kernowcraft.



