Home » All Films » Stone Setting » Bezel / Rub Over » Recycling – Molten Silver Rings – Part 3
Recycling – Molten Silver Rings – Part 3
After a while when you've been making jewellery you start to collect little pieces of off cuts and pieces of silver that you just can't do anything with. Pieces from the ends of shanks, odd jump rings, pieces of wire. There are several things you can do with this first grade scrap. One is to use it to cast with and the other is to melt it down.
In this film we are soldering on a shallow gold bezel and setting a small round cabochon. This technique is ideal if you are after something a little organic. You don't need anything special to undertake this project. No casting equipment just a torch and a solder block/board.



