Home » All Films » Stone Setting » Channel » Techniques – False Channel Setting Part Two
Techniques – False Channel Setting Part Two
Part Two Channel setting is a method whereby stones are suspended between two bars or strips of metal, called channels. The channel has two sides and a bottom. The sides are made just a bit narrower than the width of the stone or stones to be set, and then, using the same burs as in claw setting, a small notch is cut into each wall. And that is where the similarities end between 'real' channel setting and 'false' channel setting. Andrew shows you a technique that requires a good eye and skill level. This setting technique looks the same but the process required to fasten the stone in place is completely different. Intrigued? Then watch the three films in the series and find out what he means.


