Home » All Films » Tools & Equipment » Product Reviews » Techniques – Setting / Collet Making Jig Part 1
Techniques – Setting / Collet Making Jig Part 1
The Claw Making Jig is a useful piece of equipment to have if you want to accurately make, yes you guessed it....settings or collets. The instructions that accompany the jig are not that helpful so Andrew decided to film how to use it along with a couple of modifications.
The tool is used to hold wire in place while assembling wire claw settings/collets and soldering them together. This jig will make 3,4,6 or 8 claw settings/collets to hold stones from 0.15ct upto 2cts. You simply cut gold or silver wire to length, place in the jig and slide one of the holders over the wires and then solder at the base while still in the jig. Once soldered at the base the collet can be removed and used as it is or additional gallery rings can be soldered inside.



