Home » All Films » Stone Setting » Bezel / Rub Over » Techniques – Tube Setting with a Pendant Drill – Part 2
Techniques – Tube Setting with a Pendant Drill – Part 2
This video is in response to a video request from an At The Bench member. Andrew was asked to show settings, that already have stones set in them, soldered onto a ring.
By using a flexi shaft / pendant drill you can bezel set a stone that has the most perfect bezel wall with not lumps and bumps and with the stone set perfectly and not all wobbly. Not all stones can be subjected to the heat of a torch so Andrew tells you what stones can be used using this techniques. Andrew bezel sets a cubic zirconia and then cuts the setting off and solders it onto a ring blank

