Home » All Films » Techniques » Techniques – Wax Build Up Part 2
Techniques – Wax Build Up Part 2
(This film should have been tagged onto the first part as this film is only about 3 minutes long). Traditionally wax has always been carved to produce a model. Whether it be a slab of wax or a block, the wax is systematically carved away until the design, that you have had within your head or a design that you have drawn on paper, comes to life. Many people can not 'see' the design within the wax and find it hard to remove wax to leave the design. So why not reverse the process and add wax to a blank piece of wax to build up to your design. After all you add paint to a canvas when you paint.
By having a small metal container with molten wax in it, you can dip metal rods into it to produce blank rings. You can scoop the wax out and apply it and build up layers. You can be as accurate as you wish or just 'go with the flow' and have an organic random pattern. Just be careful because wax could catch fire and it does get very hot when in its liquid molten state


