Home » All Films » Techniques » Video Request – Soldering thin Silver Wire onto Silver Sheet
Video Request – Soldering thin Silver Wire onto Silver Sheet
At The Bench, teaching you techniques that you want to learn. Last week we had an email from an At The Bench member that was having problems soldering very thin wire (0.8mm) onto flat sheet. Each time she tried, the wire was melting or the solder was leaving unsightly marks on the silver sheet. A simple email to us and we have responded with a unique film to help her solve the problem.
The trouble is that not all book tell you the best techniques. While there is no right or wrong way, there are better ways to produce a result that is easier and less time consuming. By laying solder next to the wire that needs to be soldered is fine except that where ever the solder melts it leaves a mark that has to be cleaned or smoothed and polished. So lets find a way that enables you to have a perfect finish with the least amount of cleaning up and one that leaves the surface in a perfect finish with no trace of solder.



