Introduction To Piercing

The jeweller’s saw is probably the most important tool used in making jewellery. It really doesn’t matter what type of jeweller’s saw you buy, the most important part is learning to use it. Piercing (sawing) is one of the first techniques that you need to learn and master and once mastered it will become second nature to you. The more you can master the technique the less time you will spend on filing up and adjusting your work.

Piercing takes time to master. The more time you spend piercing the better you will become. It pays to practice, practice and practice. It may seem such a simple technique but it is one of the basic fundamental skills every jeweller must learn.

Starting with piercing requires very little tools and it is something that can be learned very cheaply. Saws come in a range of sizes and construction but don’t believe that an expensive say frame will give you better results and an expensive frame is no short cut to better piercing.

  • Piercing Saw
  • Saw blades
  • Bench Peg

  • How to fasten your saw blade correctly into the saw frame
  • learning how to cut straight lines
  • Learning how to cut curved lines accurately

Learning to Pierce (Saw)

Sawing metal is easier than sawing wood. The saw is light weight and comes in a variety of sizes. The saw blades are very fine and are fitted into the saw frame under tension. And in the beginning you are likely to snap quite a few but as your experience grows you will snap less blades and will tend to wear them out.

Learning To Pierce

It all starts with learning the fit the blades into the frame under tension. Without this tension your sawing will be difficult, inaccurate and you will snap plenty of blades. Get the tension right and your technique will come on leaps and bounds.

Watch Now

Piercing a Tangram Puzzle

Learning to cut straight lines. Sounds easy right? Well in theory it is but in these films Andrew shows you plenty of tips to ensure the saw goes where YOU want it to go.

Watch Now

Piercing Circles and Curves

Sawing curves. Do you turn the metal or turn the saw? Do you lubricate the saw? And if you do, what do you use. These films are packed with plenty of helpful hints and tips to enable you to pierce curves accurately.

Watch Now

Learning Path

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.